| |
 |
|
|
|
We now enter into field of Polyurethane
Tracks. “BOLDIT” manufacturers the 100% Polyurethane
Track Surface - “EPO-KEM”. EPO-KEM™ is a granule
massed E.P.D.M. along with Cape made with prolonged polyurethane
colour resins and red granules E.P.D.M. It is IAAF approved
and certified.EPO-KEM has the following features:
• Resistant to damage from spiked shoes, Comfortable,
safe and quiet to walk on
• Conforms to IAAF performance specification, Thickness
: 12 – 13mm.
• Excellent color retention. Shock absorbing, Low maintenance,
Permanently resilient
• In-situ installation gives opportunity to smooth base
imperfections
• Resistant to UV radiation and weathering, Water impermeable
(permeable variant available).
• Low glare, Slip resistant surface, Tough and resistant
to wear, elastic and flexible |
 |
Maintenance is extremely low in most circumstances.
Regular sweeping and normal rainfall should keep the surface
clean for most of the year. If staining from leaves or other
contamination occurs, it may be necessary to wash the surface
by scrubbing with a mild detergent solution. In shady areas
and tropical climates it may also be necessary to use an approved
biocide or fungicide periodically.
EPO-KEM H/S - “Structural spray” surface
athletics track system:
EPO-KEM H/S is a carefully designed composite of polyurethane
resins, accelerators, adhesion promoters, rubber granules and
textured top coats for the surfacing of asphalt and concrete
substructures. EPO-KEM H/S is formulated to be permanently elastic
and has very good wear, spike, UV and weather resistance. EPO-KEM
H/S is installed in-situ in multiple layers with specialized
mixing, paving and spraying equipment. EPO-KEM H/S is commonly
referred to as the “structural spray” system and
is suitable for club, university, school, local and regional
competition.
EPO-KEM H/PU - “Sandwich” system athletics track
surface:
EPOKEM H/PU is a carefully designed composite of polyurethane
resins, accelerators, adhesion promoters, rubber granules and
EPDM granules for the surfacing of asphalt and concrete substructures.
EPOKEM H/PU is formulated to be permanently elastic and has
very good wear, spike, UV and weather resistance. EPOKEM H/PU
is installed in-situ in multiple layers with specialised mixing,
paving and spreading equipment. EPOKEM H/PU is commonly referred
to as the “sandwich” system and is suitable for
national and international competition.
EPO-KEM RH/PU - “Solid” system athletics
track surface:
EPO-KEM RH/PU is a carefully designed composite of polyurethane
resins, accelerators, adhesion promoters, rubber granules and
EPDM granules for the surfacing of asphalt and concrete substructures.
EPO-KEM RH/PU is formulated to be permanently elastic and has
very good wear, spike, UV and weather resistance. EPO-KEM RH/PU
is installed in-situ as a single or two layer resilient surface
with specialised mixing and spreading equipment. EPO-KEM RH/PU
is commonly referred to as the “solid” system and
is the premium athletics track surface for national and international
competition. |
|
|
